#ServiceLight #KTM #890DukeR #890Duke #Maintenance #Modification Super quick video showing how to reset the service light on 890 and 890 Duke R’s. Consider f The pressure switch is located on top of the ABS unit. It's connected through a banjo bolt in the rear brake circuit. I've taken apart the switch. The connections look fine to the bike harness. I'm getting system voltage from the bike harness. The switch is normally open and closed by pressure according to the service manual. In this episode of Back in the Garage, we change the motor oil and filter in my 2016 KTM 1290 Super Adventure. I also show you how to reset your service ligh High light the service ln settings, press return button and centre button on left control at same time, hold till screen changes (20 seconds) to service - milage (ie 9500kms or mine was at 15000) change that number by using the centre button pressed then use the arrows, change the number, down then return it up to 9500, next hight light 12 1. Go to Settings Menu (do not go into line items) 2. Hold both Up/Down buttons simultaneously until Service menu pops up. 3. Hit the Set button to the no. of miles (was 600, set to 3000) 4. Hold Set until display goes to the Setting menu. marknormandin, srtipey and Woofda. . KTM Factory Wheel Set Adventure/R 2013-2023 $1,574.99 USD. KTM Factory Front Wheel 1.6x21" MX/Enduro 2015-2023 $472.99 USD. KTM Wheel Rim Sticker Kit MX/Enduro/Adventure 2008-2023 $31.99 USD. KTM Wheel Rim Sticker Kit Adventure 2013-2023 $31.99 USD. KTM Tire Pressure Monitoring System (TPMS) 790/890 Duke/GP/R 2018-2023 $155.99 USD. KTM Dongle Functionality* - E nables additional features in the ABS control unit and the ECU and remembers settings removing the need to reset the ABS and MTC every time you restart the bike. Additionally enables the 80 octane "Bad Fuel" function, which r educes engine power for trips with lower fuel quality . 2020 KTM Super Duke Service Reset. PROBLEM. Took me a few tries but I found it. Seeing as you cannot simultaneously hold up and down it's slightly different than previous bikes with the TFT. Here's the drill: Highlight Settings. HOLD Center and Back (NOT left, the back button with the curled arrow) for Five Seconds. Here's a video on how to reset your service interval on the 2017 KTM 1290R with LCD display The pressure switch is located on top of the ABS unit. It's connected through a banjo bolt in the rear brake circuit. I've taken apart the switch. The connections look fine to the bike harness. I'm getting system voltage from the bike harness. The switch is normally open and closed by pressure according to the service manual.

ktm 1290 super adventure s service reset